JK 3.0 Inch Lift Stage 1.5 Suspension System 07-18 Wrangler JKU 4 DR Synergy MFG

$2,150.50 CAD

Ships within 24-48 hours. Pickup available upon request.
SKU: 8045-30-FSVG Categories: , ,

Synergy Jeep JK 3 Inch Lift Stage 1.5 Suspension System increases the lift height to 3 inch with our 3 inch Progressive Coil Springs and takes full advantage of our Raised Rear Track Bar Bracket and Front Steering Correction Kit (8011) for optimal steering and suspension geometry. With the steering corrected for 3 inch of Lift this system will drive as good, if not better, than stock. This system will fit 35 inch tires with stock fenders or 37 inch tires with high fenders.
Details:

  • Fits 07-18 Jeep Wrangler Unlimited JK 4-Door
  • Stage 1.5 key features are front and rear track bar relocation brackets and flipped drag link
  • Front and rear bump stop extension kits
  • Rear sway bar links so the factory rears can be used in the front
  • Front and rear brake line relocation kits
  • Synergy double adjuster sleeve pinch bolt assembly allows for adjustment of control arm, track bar, tie rod, and drag link length without removal
  • Front and rear track bar relocation brackets raise track bar mounting positions increasing suspension roll center heights which improves handling on and off road
  • Control arm cam bolt kit to correct caster
  • Progressive wound coil spring manufactured using the latest in CNC hot winding technology keeps spring from coming unbound at full suspension droop
  • Suspension components feature an abrasion-resistant Powdercoat finish for maximum durability and corrosion resistance
  • 100 percent bolt on components assure an easy, trouble free installation with the use of basic hand tools
  • Requires a maximum 4-3/4 inch backspace wheel or wheel spacer with factory wheel setup. 4-1/2 inch back spacing is recommended
  • Synergy suspension systems are a modular design so all components are available separately

Notes:

  • 2012+ JK's lifted over 2 inch will require exhaust spacers (5017), or a front aftermarket drive shaft to prevent interference with the exhaust.
  • 3 inch and up lifts, aftermarket driveshafts are recommended
  • Springs are designed to provide the advertised amount of lift with use of aftermarket bumpers, wInch tire carriers. More lift will occur on vehicles in stock trim.
  • Springs retain the factory rake of the vehicle where the rear is higher than the front. Vehicle should sit level when loaded. Request one size shorter rear springs to level the vehicle out when unloaded.
  • Requires 16 inch or larger wheel diameter

Additional information

Weight 19.00 lbs
Dimensions 45.00 x 7.00 x 3.00 in
Country of Origin

US

Kit Components

8000-01 (1)
8004 (1)
8055 (1)
8056 (1)
8057-10 (1)
8058-30 (1)
8060 (1)
8063-30 (1)
8064-30 (1)
8083 (1)
8084 (1)
8097 (1)

Warranty Limited-Lifetime Warranty
Make From Year To Year Model Sub
Jeep 2007 2010 Wrangler X
Jeep 2007 2017 Wrangler Unlimited Rubicon
Jeep 2007 2017 Wrangler Rubicon
Jeep 2007 2010 Wrangler Unlimited X
Jeep 2007 2017 Wrangler Sahara
Jeep 2007 2017 Wrangler Unlimited Sahara
Jeep 2010 2017 Wrangler Unlimited Sport
Jeep 2010 2017 Wrangler Sport
Jeep 2011 2011 Wrangler 70th Anniversary
Jeep 2011 2011 Wrangler Unlimited 70th Anniversary
Jeep 2016 2016 Wrangler 75th Anniversary
Jeep 2016 2016 Wrangler Sport S
Jeep 2016 2016 Wrangler Unlimited Sport S
Jeep 2016 2016 Wrangler Unlimited 75th Anniversary
Jeep 2018 2018 Wrangler JK Unlimited Rubicon
Jeep 2018 2018 Wrangler JK Sport
Jeep 2018 2018 Wrangler JK Unlimited Sahara
Jeep 2018 2018 Wrangler JK Sahara
Jeep 2018 2018 Wrangler JK Unlimited Sport
Jeep 2018 2018 Wrangler JK Rubicon

Reviews

There are no reviews yet.

Be the first to review “JK 3.0 Inch Lift Stage 1.5 Suspension System 07-18 Wrangler JKU 4 DR Synergy MFG”

Your email address will not be published. Required fields are marked *